Well, had alot of running around this morning so I didn't get to work too much on the hearse today. I did start cutting the 3rd wheel and was almost done when the plywood (thinnner than the stuff used for the rear wheels) splintered and lost about 3 of the 4 layers in one spot. So needless to say, I can't use that one at this point. I will have to go with the thicker plywood I used for the rear wheels and start all over on it. Looking at the areas that are cut, the plywood is definitely defective - one of the layers is pretty much missing in alot of areas. Tomorrow I may just concentrate on either sanding what I have done, the supports or the horse. Here it is up on the supports that I had cut. I put it up and put the one wheel on to see what it will look like.
Tags: Black Widow Hearse Project
