Viewing 1 - 8 out of 8 Blogs.

once again with the busy season i was unable to snap shots of the finished haunt. night and daylight video was taken and will be edited for DVD purchase ( small fee, TBA @ www.frightmarestudios.com )

here are some 08 construction teasers.

click for flickr photoset

0 comments View Entry

the new frightmare studios atmosfears volume 1 cd is coming together finally! look for the release of the cd by the end of sept, first week of october, just in time for your haunted attraction!!!!

2 track samples can be found on the fms website @ www.frightmarestudios.com 

stay tuned!!!!

Tags: Sounds Scary Atmosphere Soundscape

building 15 truss's from scratch.






and here we go with the truss's










the overhang on the sides i was very unpleased with so i had to build some extentions off the ends of each truss to get the length i wanted. in the end it worked out PERFECT.

there is no pictures of us sheeting the roof because it was a downpour and we were in such a hurry to get everything covered. the roof was then covered with a gigantic tarp to keep the osb from flaking. shingles are going to cover the osb roof.

moving to the inside!






here comes the paint!


from the inside looking at the finished back wall!


when anyone drives up and down my ally this is the site they will see




like i said before i wasnt hapy witht he overhang so i cut a length i like and i added extra support lengths to the truss.




the haunt is finished! the paint is on!


the inside maze is next.

onward!

moving along to the other wall


framed just needs its panels




2 side walls are finished!


onward to the slotted front and back walls. first truss was built and put in place to hold the front facia together.










a look from the inside out.


after cutting out the main entrance door.

here is the start of Frightmare 06. the 10 ton of 2b stone and the base of the floor. treated 2x6's



after that came laying down the floor braces and the 5/8" cdx ply floor.


moving along


finished!


small rain delay. but onward with the wall frames.




wall paneling going up




not bad for day one.

here is 2 EARLY videos of the frightmare 06 setup. due to time not many videos or picture were taken of the 06 haunt. the 06 dvd will not be released. stay tuned for 07.

these were filmed on a garbage 2.8mp sony digi cam.

Frightmare HUB


Frightmare Haunt (early construct)


Frightmare Tour (early construct)

Frightmare Hot Glue Webber $100 (includes postage)

includes:
1 hot glue webber gun w/quick air shut-off.
1 printed instruction sheet.
3 10" glue sticks to begin shooting webs.

description:
ever wonder how frightmare or other haunted attractions spin their cob webs, opposed to expensive web-spinner units? these are called hot glue webbers, and that's exactly what they do. hgw spray out realistic looking webs much faster than fan type web-spinners. Whether you need close-in webs for detailed work, or are shooting webs over the front of your garage, this unit can do the job. Using the flow-valve, you can adjust amount and density of the cob-webs produced. the web material cleans off easily, but we always recommend that you test some on important materials. this unit uses regular hot glue sticks to produce lots of great looking cob-webs. or, you can buy special glow-in-the-dark glue sticks that glow under black light. another nice benefit to these types of hgw, is that you don't have to worry about the web fluid drying up over time. (requires AC power and 100psi air compressor)

Frightmare Fog Blower Box $200 (includes postage)

includes:
1 fog blower box
1 printed instruction sheet.

description:
only have one fog machine but need your fog shot/spread in more places then one? then frightmares fog blower box is for you! frightmares fbb allows you to hookup 4 different 4" dryer duct hoses to duct fog to anywhere in your haunt! each duct is capped and can be removed for a hose hookup. so if you dont want to use all 4 then you dont need to. (requires AC power, and fog machine-not included)

please note: due to item availability please email me: frightmare@thejdm.com or contact me on hauntspace and i will give you an eta.

i think i was deleted by the admin last time?

im back. noone cares :)